物料阻塞是破碎机械设备的常见故障。 在破碎机械设备的生产过程中，一旦物料被堵塞，设备将被迫停机并影响生产效率。 那么，反击和损坏的原因是什么，以及如何应对呢？ 以下是反击式破碎机堵塞现象的原因和解决方案。
Material blockage is a common failure of crushing machinery and equipment. In the production process of crushing machinery and equipment, once the material is blocked, the equipment will be forced to shut down and affect production efficiency. So, what is the reason for the counterattack and damage, and how to deal with it? The following are the reasons and solutions for the clogging of the impact crusher.
When the hardness of the material is large, it is not easy to break, or the particle size of the feed exceeds the large range restricted by the impact crusher. When the crushing between the impact plate and the hammer is not enough, the discharge port will also be blocked.
Solution: Before the material enters the crushing cavity, it is necessary to clarify the applicable materials of the impact crusher, especially the requirements for material performance
破碎机依靠三角皮带将动力传递到料槽，达到物料破碎的目的。 如果三角皮带太松，将无法驱动槽，这会影响物料的粉碎或阻止粉碎的物料顺利清除。 造成堵塞。
The crusher relies on the V-belt to transmit the power to the trough to achieve the purpose of material crushing. If the V-belt is too loose, it will not be able to drive the tank, which will affect the crushing of materials or prevent the smooth removal of crushed materials. Cause blockage.
Solution: During the production and crushing process, please pay attention to check the tightness of the V-belt.
If the water content in the raw materials is large and the viscosity is high, the crushed materials will easily adhere to the sides of the screen holes and the liner, resulting in a reduction in the volume of the crushing cavity and a reduction in the number of passes. The speed of the screen holes causes the material to block.
Solution: You can preheat the impact plate and the feed inlet, install drying equipment, or heat the material to reduce the moisture in the material.
If the main components of the impact crusher wear out, the crushing effect of the material will also cause blockage.
Solution: Pay attention to check the wear of the parts, and replace the severely worn parts in time to ensure the crushing effect of the material and reduce the blockage of the material.
Part of the cause of the blockage is operator error, who may be unfamiliar with the process or temporary errors.
Solution: Equipment operators must undergo rigorous training to qualify. They must not only be familiar with the operating specifications of the equipment, but also must understand the process of the entire production line.